Knowledge Base (FDM)
A 3D printer that stops feeding plastic or suffers from poor extrusion can be very frustrating. This is a common problem and therefore it is important to un...
Mon, 11 Sep, 2017 at 10:30 AM
One of the most common challenges in 3D printing is that the model adheres properly to the build plate during 3D printing. Below you will find our best tips...
Wed, 13 Sep, 2017 at 10:43 AM
Introduction Due to the nature of polymers, when returning from melted to a solid state the plastic will shrink and cause parts of the 3D-print to “lift” f...
Mon, 11 Sep, 2017 at 10:39 AM
Description Sometimes while printing the printhead may leave thin strands of plastic while performing non extruding movements When the printhead stops ...
Mon, 11 Sep, 2017 at 10:44 AM
In order for us to provide the best possible service and resolve cases in a fast and easy way, it is important that the following instructions are followed....
Tue, 12 Sep, 2017 at 9:52 AM
If you get layer shifts, it is very likely it´s a problem with the mechanics of the machine. However, before we go over the mechaincs of the machine anothe...
Mon, 11 Sep, 2017 at 10:43 AM
At initial calibration of the building plate, you can benefit from the automatic adjustment using the "Level buildplate" function in the 3D printe...
Tue, 12 Sep, 2017 at 9:46 AM
If the printer is unable to complete the buildplate leveling script due to the error message "Distance To Small" performing a extruder calibration...
Tue, 12 Sep, 2017 at 9:41 AM
One common problem is that the nozzle is completely or partially clogged, which contributes to poor or no plastic being extruded at all. (Learn more about t...
Mon, 11 Sep, 2017 at 11:23 AM
Like any kind of technical device, a 3D printer works best when the operator performs checks at each time of use, and also performs preventive maintenance a...
Mon, 11 Sep, 2017 at 12:02 PM